MEC-O-MATIC Series Dolphin
PRODUCT LITERATURE
Tech Sheets
Installation & Operating Manuals
Forms & Applications
ADDITIONAL LITERATURE AVAILABLE
IN THE
DOWNLOADS SECTION
Chemical solution and slurry metering pumps designed, engineered, and built to last. The pump case is molded of a rugged, chemical resistant ABS. Mounting pads and a built-in wall mounting bracket allow a choice of flat surface or wall mounted installation.
The thermal or impedance protected gear motor is safe, quiet and dependable. All metal gearing parts are heat-treated and the output shaft is supported by heavy-duty bearings.
The feeder head is molded of UV and acid resistant polycarbonate and is designed to snap on and off without tools.
A 10-minute solid-state electric current interrupter is a standard feature, built into every MEC-O-MATIC Dolphin Series pump.
Features
- Exclusive quick-release, twist-off, head.
- Self-lubricating chemical resistant roller assembly.
- Heavy-duty shaded pole gear motor with lifetime lubrication.
- Feed rates from 13 gpd (2.05 lph) to 97 gpd (15.3 lph) at 25 psi (1.72 bar).
AVAILABLE MODELS
- Series 2400T
- Flow on 2400T-DC -3.0 oz / 1 min max pressure 25 psi (1.72 bar).
- Flow rate 2.5 gpd (0.39 lph) at 25 psi (1.72 bar).
- Programmable.
- Quick Release Twist Off Head.
- Built-In Timer.
- Self Lubricating Roller Assembly.
- Series Dolphin
- Exclusive quick-release, twist-off, head.
- Self-lubricating chemical resistant roller assembly.
- Heavy-duty shaded pole gear motor with lifetime lubrication.
- Feed rates from 13 gpd (2.05 lph) to 97 gpd (15.3 lph) at 25 psi (1.72 bar).
- Series Stingray
- Feed rates from 8 gpd (1.26 lph) to 90 gpd (14.19 lph) and up to 100 psi (6.9 bar).
- Chemical-resistant plastic casing.
- Corrosion-resistant rubber and plastic solution handling components.
- Series T2000
- Consistent misting pattern for maximum effectiveness.
- Capacity of 180cc/6 oz. per minute at 100 psi (6.9 bar).
- Wide angle misting nozzle provides optimum pattern.
- Series VSP
- Dispense low volumes of chemicals at exacting amounts.
- Feed rates from 12 gpd (1.89 lph) to 20 gpd (3.15 lph) at 25 psi (1.72 bar).
- Heavy-duty gear motor.
- Self-lubricating roller assembly.
- Exclusive quick-release, twist-off head.
| HOME | PRODUCTS | TECHNOLOGIES | MARKETS & APPLICATIONS | SERVICE & SUPPORT | DOWNLOADS | NEWS | ABOUT US | CONTACT US |
| COPYRIGHT© PULSAFEEDER 2012. PULSAFEEDER IS A UNIT OF IDEX® CORPORATION. PRIVACY POLICY | TERMS & ACCESS |
 |